安裝工程工程量計算書模板（改版）.rar

 真無語了 大家頭腦簡單了吧 以后把這些網站的廣告都屏蔽了 就意味著這些網站都餓死 餓死后就沒有那些免費的資源 以后大家去網上干什么都需要付費 到時候怎么辦？有人想過嘛？

安裝工程工程量計算表使用說明書  
1、計算工程量前，肯定要進行熟習圖紙（高手除外）和收集相關的圖集資料。此時可以打開《匯總表》把圖紙上所涉及到工程量計算的工程項目一一羅列出來，當然不用先急著計算工程量,但可以套上定額編號或清單編碼，套上定額編號或清單編碼后，表格自動編序號。對于直接可以清點出工程量的少量工程項目，如配電箱等可以將工程量直接寫入?yún)R總表。  
2、圖紙也看完了，要計算的項目心中也有數了，可以打開按圖紙計算工程量了，同我們手工計算一樣，在《計算表》中，填寫計算部位，規格，列算式，當然計算結果不用我們?cè)侔从?jì)算器的了。計算中，要注意，匯總是自動完成的，且是按特征規格欄進行分類合并的。這一欄必須與《匯總表》欄保持名稱一致，如 PC20管暗設，可以就寫“PC20/暗”,具體按個人書寫習慣了。  
    3、校驗一列，是用來核對我們《計算表》特征規格同《匯總表》特征規格是否一致或是否有項目，如規格類別名稱沒有或錯誤，如“PC16”寫成 “PC15”,則顯示“請核對”，核對無誤則打鉤“√”。為了節省時間，或不打斷思路，就先一步一步先算吧。最后把有“請核對”的項目修正至全部為“√” 就可以了。  
    4、《封面》中分部工程、分項工程中的填寫內容,可利用“▼”按鈕進行選錄,缺項內容可自行在《單位庫》中B列、C列補錄。  
    5、《匯總表》中序號在定額號錄入后可自動錄入。  
    6、《匯總表》、《計算表》中的單位中的填寫內容,可利用“▼”按鈕進行選錄,缺項內容可自行在《單位庫》中A列補錄。  
    7、《計算表》的計算表達式中,可利用“[、]”填寫附注內容。  
    8、《計算表》中增加操作序,便于在利用排序功能尋找相同項目后恢復原位。  
    9、《匯總表》、《計算表》均設置多頁打印表頭自排功能和頁碼自動排序。  
    10、《匯總表》、《計算表》均設置表頭凍結,便于查看。  
    11、EXCEL是博大精深，其它操作詳見OFFICE幫助了。  
                                                                                                          2006/03/05  
Installation manual engineering calculation table
1, calculate quantities before, it must be familiar with the drawings (except master) and atlas collection of related information. At this point you can open the "matrix" to drawings calculation involved in the projects projects have set out, of course, anxious for the projects without first volume, but you can put on the list of the fixed number or code, put on a fixed number or list encoded, the form automatically compiled serial number. Can be counted directly works for a small amount of engineering projects, such as power distribution boxes and other quantities can be directly written summary.
2, drawing also read, and to calculate the project in mind, there were several, and can open the quantities calculated according to the drawings, and the same as we calculated by hand, in the "Calculator", fill in the calculated position, size, column formula, of course, results We then need a calculator. Calculation, we must note that summary is done automatically, and is classified according to characteristics of the combined column specifications. This column must be "summary" column to keep the same name, such as PC20 pipe secretly, could write "PC20 / dark", specifically by individual writing habits.
    3, check 1, is used to check our "Calculator" feature specifications of the "matrix" feature specifications are identical or whether the project, such as the size category name does not or error, such as "PC16" written "PC15", then "Please check" to verify correct then tick "√". To save time, or do not interrupt the train of thought, first, step by step on the first count it. Finally to the "Please check" project amendments to all the "√" on it.
    4, "cover" in the engineering division, sub-projects completed in the content, can use "▼" button to select record, missing items are free in the "unit bank" in column B, C out makeup on.
    5, "matrix" in the serial number in the fixed automatic entry after entry.
    6, "Summary Table", "calculating table" the complete contents of the unit can be used to "▼" button to select record, missing items are free in the "unit bank" in the A column makeup on.
    7, "Calculator" in the calculation of expression can be used to fill in notes "[,]" content.
    8 "Calculator" in order to increase operations to facilitate the use of sorting to find the same items to restore in situ.
    9, "matrix", "computation" are set to print multi-page header and page number from the row of automatic sorting function.
    10, "Summary Table", "Calculator" in the header are set to be frozen, easy to view.
    11, EXCEL is profound, see OFFICE helped other operations.
                                                                                                          2006/03/05
 

前往下載