壁柜、吊柜安裝施工工藝.doc

1. 范圍
本工藝標準適用于一般建筑和賓館建筑壁柜、吊柜安裝工程。

2. 施工準備
2.1  材料及構配件
    2.1.1  壁柜、吊柜制品由工廠生產成成品或半成品，木材制品含水率不得超過12%。加工的框和扇進場時，應核查型號、質量，驗證產品合格證。
    2.1.2  其他材料：防腐劑、插銷、木螺絲、拉手、鎖、碰珠。合頁等，按設計要求的品種、規格、型號備購。
    2.2  主要機具：
    2.2.1  電動機具：電焊機、手電鉆、小臺鋸。
    2.2.2  手用了具、大刨、二刨、小刨、裁口刨、木鋸、斧子、扁鏟、木鉆、絲錐、螺絲刀、鋼鋸、鋼水平、鑿子、鋼挫、鋼尺。
    2.3  作業條件。
    2.3.1  結構工程和有關壁柜、吊柜的連體構造已具備安裝壁柜和吊柜的條件，室內已有標高水平線。
1. Scope
This technology is applicable to general construction and hotel building cabinets, hanging cabinet installation.

2. Construction preparation
2.1 Materials and components and parts
    2.1.1 cabinets, hanging cabinet products from the plant into finished or semi-finished products, wood products shall not exceed 12% moisture content. Processing comes into the box and the fan should check type, quality, and verify product certification.
    2.1.2 Other Materials: preservatives, bolt, wood screws, handles, locks, touch beads. Hinge and so on, according to design requirements of the species, size, type equipment purchased.
    2.2 Main equipment:
    2.2.1 Motors with: welding machine, hand drill, a small table saws.
    2.2.2 to use to a large plane, two plane, small plane, cut mouth plane, wood saw, axes, flat shovel, wood drill, tap, screwdriver, hacksaw, steel level, chisel, steel fell, steel rule.
    2.3 Operating conditions.
    2.3.1 Structural Engineering and the cabinet, hanging cabinet of the conjoined structure has been installed on cabinets and hanging cabinet with the conditions, interior elevation of the horizon has been.
 

前往下載